What is lab equipment calibration?

In the context of lab research, it typically means adjusting or standardizing your equipment so it can be more precise. This can include marking the graduations on a measuring device, or figuring out how much an instrument deviates from standard and adjusting for that difference.

How often should pressure gauges be calibrated

Calibration is the procedure of comparing a reference with a known error margin against a device (for example a pressure gauge) under test. If the device doesn’t match the reference, then we adjust it to match, or at least come close, the desired measuring accuracy. The reference measurement instrument must be more accurate than the pressure gauge to be calibrated, and it must also be traceable. To calibrate a pressure gauge, we will need to check the values throughout the entire measuring range, zero point, intermediate values, and the full-scale value.

What does calibrating an instrument mean

Calibration is a comparison between a known measurement (the standard) and the measurement using your instrument.

What is the purpose of equipment calibration?

It is important to calibrate equipment to help assure accurate measurements and production of quality products with reduced errors and recalls. It is also important to calibrate equipment to foster innovation and the development of new technologies, as accurate measurements are foundational to both.

How often should you calibrate lab equipment?

Instrument calibration and maintenance are an integral part of any operation in manufacturing/ laboratory. and are vital for data quality assurance. Accurate and reliable monitoring results are crucial for data analysis, particularly when the monitoring results are to be compared with the relevant standards or guidelines for compliance purposes, or for population exposure and health risk assessments. Where such analyses lead to air quality policy formulation and the quality of the original data is especially important. This Procedure outlines the basic requirements for the calibration and maintenance of monitoring instruments based primarily on standard monitoring methods. Monitoring agencies should develop their own detailed calibration and maintenance programs appropriate to their data quality assurance goals.

LAB COMPANION MODEL RW-1025G 10 LITER REFRIGERATED AND HEATING C

$2,382.55

Shipping Weight: 97lbs

Manufactured by: Jeio Tech

This product was added to our catalog on Monday 02 October, 2017.

1 in stock

Add to quote

Description

Rapid heating and cooling throughout the entire temperature range!
Operating features

-25℃ to 150℃ for RW-25G/ -35℃ to 150℃ for RW-40G
Microprocess PID control/ Auto-tuning/ Calibration
Digital timer: 1 min to 99 hr 59 min, delayed ON/ OFF
Over-temperature limiter and low fluid level protection
3 different temperature values memorable without auto-tuning
Digital LED display (0.1℃ resolution) with splash-proof keypads
RS-232 interface available

Constructional features

Turbulence reduced five-speed duplex pump and built-in cooling coil let you use in open or closed bath applications (1 to 3 steps of pump for internal circulation/ 4 and 5 steps for external circulation)
Baffle plate screens circulating pump, heater and sensor to minimize shaking bath fluids and protect sample and operators from direct contact
Dry-running protection; automated heating element cut-off and audible and visual warning
Seamless stainless steel tank with a reservoir drain that resists corrosion and make cleaning easy
Use CFC-free refrigerant R-134A, R-404A and double service valve to prevent the leakage of refrigerant
Quick-release front grille for easy condenser cleaning and space saving design uses minimal bench space