What is lab equipment calibration?

In the context of lab research, it typically means adjusting or standardizing your equipment so it can be more precise. This can include marking the graduations on a measuring device, or figuring out how much an instrument deviates from standard and adjusting for that difference.

How often should pressure gauges be calibrated

Calibration is the procedure of comparing a reference with a known error margin against a device (for example a pressure gauge) under test. If the device doesn’t match the reference, then we adjust it to match, or at least come close, the desired measuring accuracy. The reference measurement instrument must be more accurate than the pressure gauge to be calibrated, and it must also be traceable. To calibrate a pressure gauge, we will need to check the values throughout the entire measuring range, zero point, intermediate values, and the full-scale value.

What does calibrating an instrument mean

Calibration is a comparison between a known measurement (the standard) and the measurement using your instrument.

What is the purpose of equipment calibration?

It is important to calibrate equipment to help assure accurate measurements and production of quality products with reduced errors and recalls. It is also important to calibrate equipment to foster innovation and the development of new technologies, as accurate measurements are foundational to both.

How often should you calibrate lab equipment?

Instrument calibration and maintenance are an integral part of any operation in manufacturing/ laboratory. and are vital for data quality assurance. Accurate and reliable monitoring results are crucial for data analysis, particularly when the monitoring results are to be compared with the relevant standards or guidelines for compliance purposes, or for population exposure and health risk assessments. Where such analyses lead to air quality policy formulation and the quality of the original data is especially important. This Procedure outlines the basic requirements for the calibration and maintenance of monitoring instruments based primarily on standard monitoring methods. Monitoring agencies should develop their own detailed calibration and maintenance programs appropriate to their data quality assurance goals.

Calibration of Laboratory Equipment in San Francisco

Home » Calibration of Laboratory Equipment in San Francisco

Biotechnical Services Inc. (BTS) specializes in equipment calibration services in San Francisco and has over 31 years of industry experience. They also have branches in San Diego, Los Angeles in California, Arizona, Nevada, and Utah. The additional services they provide include equipment validation and asset management.

Lab Calibration Specialists in San Francisco

Biotechnical Services offer exceptional equipment validation and calibration services in San Francisco that surpass their competitors in the industry. Not only have we had a number of years of experience, our innovative approach ensures that we are up to date with market trends and emerging research.

BTS has been certified by the American Global Standards, LLC (AGS) and accredited by the American Association for Laboratory Accreditation (A2LA). Every one of our processes and procedures follow strict guidelines and adhere to regulatory standards. Our engineering teams are also some of the most highly qualified and knowledgeable in their specialized field.

Ensuring that our scientists are able to enhance and develop new skills is a necessity for Biotechnical Services as a company. Excellence and high quality work is at the heart of what we aim to achieve every day.

The areas that BTS services are:

San Francisco
San Diego
Los Angeles
Arizona
Nevada
Utah

Benefits of Regularly Calibrated Lab Equipment

It is highly important that your lab equipment be calibrated on a regular basis. This ensures that it maintains its accuracy and provides the correct output when taking readings in a laboratory or controlled space. If your equipment is needed to service the general public or for experiments that require accuracy, an uncalibrated piece of equipment could cause major problems.

Biotechnical Services ensures that the calibration of your laboratory equipment San Francisco is correctly and efficiently performed. If you are unsure as to whether your equipment needs to be calibrated or if it is starting to underperform, our dedicated teams will guide you in the right direction and determine your needs.

Other benefits of lab calibration services in San Francisco are:

Improved Safety

If not calibrated correctly, equipment can break or be damaged, which will ultimately affect the safety of the lab technicians or anyone working with the equipment itself. BTS has a thorough equipment calibration process, so that equipment is properly checked and calibrated. This ensures that any large or small scale experiments are safe and risk-free in terms of any equipment potentially breaking.

Cheaper Costs

Poorly calibrated equipment can ultimately waste time, energy and costs in the long run, due to the mechanical and operational issues they will cause time and time again. By calibrating your lab equipment regularly and correctly, it prevents you from having to buy brand new equipment. This, in turn, allows you to save on additional production costs that would have been incurred and increase your ROI.

Data Integrity

Calibrated equipment can even promote data integrity. If equipment and sensors aren’t correctly calibrated, they might record inaccurate results which will then lead to defected products or backlogs. In some cases, the lack of timely calibration will also lead to an audit failure and could mean the business loses its accreditation or faces fines. It is important to maintain high standards when it comes to this aspect by following the correct accreditations and regulation set out by American Global Standards, LLC (AGS) and the American Association for Laboratory Accreditation (A2LA).

Types of Calibration Services

Equipment calibration can be divided into the following subsections: Mechanical, Electrical, Temperature and Pressure. Equipment such as torque tools, weights, balances and cales will require mechanical calibration. Counter timers and data loggers require electrical calibration. Dial thermometers and chambers will need temperature calibration and barometers and gauges will require pressure calibration.

Biotechnical Services carries out calibrations in all of the above categories.

San Francisco Instrument Calibration Services

The equipment calibration services that Biotechnical Services offer in San Franisco are:

Meter Calibration
Scale Calibration
Pressure Gauge Instrument Calibration
PCR Instrument Calibration

Let’s have a closer look at a few of these examples.

Meter Calibration

A meter calibration process requires you to compare the measurements of a flow meter under to that of a calibrated flow meter. We will compare the flow meter readings using a measured volume of liquid and we would then adjust the measurements accordingly.

Biotechnical Services Inc. follows official and regulatory standards throughout your calibration process. We define pre-calibration points so that your equipment is calibrated correctly and further substantiates your equipment reaching its full range of operation.

Scale Calibration

A scale calibration process requires you to place a weight on the scale and determine whether the scale measures an accurate reading. For scales used in processing and manufacturing businesses, incorrect measurements will cause issues in product quality, batches to be scrapped and in some cases products to be recalled. Calibration is essential ensure that your scale measures accurately.

Lab Equipment Calibrations Trusted By Many

We have provided equipment calibration services in San Francisco to a number of industries including:

Biotech
Pharmaceutical
Academic Labs
Aerospace
Food Industry

Here are what a few of our customers have to say about our services:

“This company has a couple amazing technicians that really know what they’re talking about! The owner has bent over backwards to help us and we highly recommend bts!” – L

“Really love their service. Jason Ensign is a awesome technician. Communication is the best part about BTS, always on time and explain everything I need to know on what service they are doing. Recommend for calibration and validation service.” – Steven Sa

Equipment Calibration Service That Works For You

Biotechnical Services Inc. (BTS) caters to all your calibration service requirements, with a variety of services that are modified to your individual needs.

Mail-In

Equipment can be mailed to a specified address if you prefer. We make sure to pack any delicate equipment extremely carefully, and so that it arrives to you safely.

Pickup

Each one of our branches have dedicated pickup points, that allow you to order online and collect the order yourself instead of having it delivered.

Delivery

We provide efficient delivery services for your convenience. All Orders are processed for shipping Monday through Friday 9:00 – 5:00 PM Pacific Time. We aim to have orders delivered within 24 hours if your specified item is in stock.

On-Site

An array of laboratory equipment can be bought at any of our on-site premises. This allows you to view and pick the item that best suits your needs.

TESTIMONIALS

“We have used BTS for years. Their knowledge and service is top notch! We use them for repairs and calibration of our equipment.” – Abcore

Conclusion

Biotechnical Services offers outstanding equipment calibration services in San Francisco for your business needs. From scale calibration and meter calibration to equipment repair and validation, we follow strict regulatory processes to ensure the highest possible quality in your service. With years of experience in the industry, we are the best option for you. Give us a call for your next calibration service.

Calibration of Laboratory Equipment in San Francisco

Lab Calibration Specialists in San Francisco