What is lab equipment calibration?

In the context of lab research, it typically means adjusting or standardizing your equipment so it can be more precise. This can include marking the graduations on a measuring device, or figuring out how much an instrument deviates from standard and adjusting for that difference.

How often should pressure gauges be calibrated

Calibration is the procedure of comparing a reference with a known error margin against a device (for example a pressure gauge) under test. If the device doesn’t match the reference, then we adjust it to match, or at least come close, the desired measuring accuracy. The reference measurement instrument must be more accurate than the pressure gauge to be calibrated, and it must also be traceable. To calibrate a pressure gauge, we will need to check the values throughout the entire measuring range, zero point, intermediate values, and the full-scale value.

What does calibrating an instrument mean

Calibration is a comparison between a known measurement (the standard) and the measurement using your instrument.

What is the purpose of equipment calibration?

It is important to calibrate equipment to help assure accurate measurements and production of quality products with reduced errors and recalls. It is also important to calibrate equipment to foster innovation and the development of new technologies, as accurate measurements are foundational to both.

How often should you calibrate lab equipment?

Instrument calibration and maintenance are an integral part of any operation in manufacturing/ laboratory. and are vital for data quality assurance. Accurate and reliable monitoring results are crucial for data analysis, particularly when the monitoring results are to be compared with the relevant standards or guidelines for compliance purposes, or for population exposure and health risk assessments. Where such analyses lead to air quality policy formulation and the quality of the original data is especially important. This Procedure outlines the basic requirements for the calibration and maintenance of monitoring instruments based primarily on standard monitoring methods. Monitoring agencies should develop their own detailed calibration and maintenance programs appropriate to their data quality assurance goals.

LAB COMPANION MODEL LCH-11G HEATING & COOLING CHAMBER

Name: LAB COMPANION MODEL LCH-11G HEATING &amp; COOLING CHAMBER
SKU: AAHK6123U
Availability: InStock

$5,132.38

Shipping Weight: 264lbs

Manufactured by: Jeio Tech

This product was added to our catalog on Monday 11 March, 2019.

1 in stock

Add to quote

SKU: AAHK6123U Category: CHAMBERS

Description

Performance

Microprocessor PID control.
Temperature calibration / Automatic tuning.
Adjustable three-step fan speed with defrosting time and period control.
Forced air convection using an optimal cross flow fan for chamber temperature uniformity.
Energy efficiency is achieved thanks to optimization of the insulation system. The surface of the unit doesn’t allow high temperatures of over 60℃.

Convenience

Two independently controlled chambers merged into a single unit for space saving.
Intuitive control panel with bright LED display (0.1℃resolution) and touch-sensitive keypad.
Dual wait on/off timer modes. (1 min. to 99 hr. 59 min.)
Convenient preset function for 3 most commonly used temperature settings.
Up to 9 temperature steps and maximum 200 cycles of repetition programmable for each profile.
Built-in cable port to use other instruments inside the chamber. (diameter: 80mm)
RS-232 interface for external control and data collection.

Safety